Kemper Exhaust set with rigid metal tube arm, Length 4 m, Ø 150 mm Fan: 2.000 m³/h, 0,75 kW

The KEMPER exhaust set consists of a 2 m, 3 m or 4 m long exhaust arm, a fan with wall bracket and a motor protection switch. For use where it is not absolutely necessary to filter the air.

KEMPER exhaust arms are excellent for the extraction of welding smoke, gases, vapors, light dust and solvents.

The hose-type exhaust arm consists of an internal parallelogram support linkage with spring support and a polyester fabric reinforced hose with PVC coating with coiled steel wire bonded
in. The 360° rotating evacuation hood with throttle valve can be swiveled in all directions.

The fans were designed especially for connection to
KEMPER exhaust arms.
The housing and impeller consist of non-sparking, cast silumin.
The impeller is balanced statically and dynamically.

This ensures perfectly smooth operation and minimum noise development. The housing has a powder finish. Including connection flange for Ø 160 mm exhaust pipe.